{"title":"368E Accessories","description":"\n\n\u003cp\u003eThe 368E is the GT of the 368 family. Same 368 cc single, same 38.7 hp and 40 Nm, same 11.8:1 compression - but where the 368D is compact and sporty and the 368G is a crossover, the 368E is built around space, weather protection and daily comfort. Official consumption is 3.4 l\/100 km with 79 g\/km CO2. The seat sits at a low 770 mm, the underseat compartment swallows two full-face helmets with courtesy lighting and a soft lining plus a central storage tray, and the leg shield holds two deep compartments, the left one with USB and USB-C sockets. The centre stand is easy to use and low-speed balance is good.\u003c\/p\u003e\n\n\u003ch3\u003eWhere the 368E actually needs help\u003c\/h3\u003e\n\n\u003cp\u003eStorage is not the problem here - two helmets fit under the seat, so a top case is optional rather than essential. The recurring theme in owner and press feedback is ergonomics: the seat-to-footboard distance is short and the handlebar sits close to the torso, which leaves riders above roughly 175 cm feeling folded up. That makes this collection unusual. Bar risers, backrests and seat solutions matter more here than they do on any other Zontes scooter, and taller riders often look at footboard and peg options too. Beyond ergonomics, the standard demand pattern applies: taller screens for winter, hand guards, crash protection for the wide bodywork, and covers, because a scooter this size usually lives outside.\u003c\/p\u003e\n\n\u003ch3\u003eFitment and a practical warning\u003c\/h3\u003e\n\n\u003cp\u003eThis collection covers the ZT368-E, the ZT368T-E internal code, the \"368E ETC\" naming used in Spain and the MY26 revision. One handling note worth knowing before you fit a cover or move the scooter by hand: with the ignition off, turning the bars fully to the left engages the steering lock automatically, and it is easy to lose your balance if you are not expecting it. Take that into account when working around the bike in a garage.\u003c\/p\u003e\n","products":[{"product_id":"368e-368d-368m-stainless-steel-footboard-pads","title":"Zontes 368E 368D 368M Stainless Steel Footboard Pedal Pads","description":"\u003cp\u003e Upgrade the footboard area of your compatible Zontes scooter with these model-specific pedal pads. Designed for the Zontes 368E, 368D and 368M, the panels add a metal styling detail to the original footrest area while helping provide an additional surface layer over the factory platform. \u003c\/p\u003e\n\n\u003cp\u003e The stainless steel construction stated for this accessory gives the footboard area a more finished and customized appearance suitable for everyday riding. \u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eModel-Specific Design:\u003c\/strong\u003e Intended for Zontes 368E, 368D and 368M models.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStainless Steel Construction:\u003c\/strong\u003e Metal construction designed for durability and a clean appearance.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFootboard Upgrade:\u003c\/strong\u003e Adds an additional surface layer to the original rider footrest area.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCustom Styling:\u003c\/strong\u003e Provides a more detailed and finished look around the scooter floorboard.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eProtective Surface:\u003c\/strong\u003e Helps reduce direct cosmetic wear on the covered portion of the original footboard.\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003eZontes 368E\u003c\/li\u003e \u003cli\u003eZontes 368D\u003c\/li\u003e \u003cli\u003eZontes 368M\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003ePlease confirm your motorcycle model and compare the footboard shape and mounting points before ordering.\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Footboard Pedal Pad \/ Step Plate\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eInstallation Area:\u003c\/strong\u003e Rider Footboard \/ Footrest Area\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Footboard Styling \/ Surface Protection\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e 0.5 kg\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Zontes 368E \/ 368D \/ 368M\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch2\u003eStyling and Protection\u003c\/h2\u003e\n\n\u003cp\u003e The rider footboard is exposed to footwear contact during every ride. These metal pedal pads create an additional surface over the corresponding area to help reduce direct cosmetic wear while giving the scooter a more customized appearance. \u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\n\u003col\u003e \u003cli\u003ePark the motorcycle securely on a stable surface.\u003c\/li\u003e \u003cli\u003eClean and dry the original footboard area.\u003c\/li\u003e \u003cli\u003ePosition the corresponding pedal pad over the correct section.\u003c\/li\u003e \u003cli\u003eAlign the mounting points carefully.\u003c\/li\u003e \u003cli\u003eInstall the components using the corresponding mounting method.\u003c\/li\u003e \u003cli\u003eCheck that each pad is securely positioned before riding.\u003c\/li\u003e \u003cli\u003eConfirm that the installed parts do not interfere with normal foot placement or motorcycle controls.\u003c\/li\u003e \u003c\/ol\u003e\n\n\u003cp\u003e \u003cstrong\u003eImportant:\u003c\/strong\u003e Make sure all components are securely installed and do not create loose edges or interfere with safe rider foot placement. \u003c\/p\u003e\n\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003eFootboard Pedal Pad Component(s) According to Product Configuration\u003c\/li\u003e \u003c\/ul\u003e","brand":"Zontes Accessories","offers":[{"title":"368M","offer_id":46568685961412,"sku":"14:200004890#368M","price":69.9,"currency_code":"USD","in_stock":true},{"title":"368E","offer_id":46568685994180,"sku":"14:193#368E","price":69.9,"currency_code":"USD","in_stock":true},{"title":"368D","offer_id":46568686026948,"sku":"14:200004889#368D","price":69.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3600\/7364\/files\/Sc689f0b56a3e446d86a4845db9e4f9d4M.webp?v=1787606936"},{"product_id":"368-501g-cnc-exhaust-tip-cover","title":"Zontes 368G 368M 368K 368D 368E 501G CNC Exhaust Tip Cover","description":"\u003cp\u003e Upgrade the appearance of the original exhaust outlet on your compatible Zontes motorcycle with this CNC aluminum exhaust tip cover. Designed to mount directly onto the end of the original exhaust, it adds a more detailed metal finish while providing an additional protective trim around the exhaust outlet. \u003c\/p\u003e\n\n\u003cp\u003e CNC-machined from aluminum alloy and finished with an anodized surface, the cover is available in multiple colors to coordinate with other accessories and styling details on the motorcycle. \u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eCNC Aluminum Construction:\u003c\/strong\u003e Precision-machined aluminum alloy provides a durable and lightweight metal finish.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eOriginal Exhaust Installation:\u003c\/strong\u003e Designed to install directly onto the compatible original exhaust outlet.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eAnodized Surface:\u003c\/strong\u003e Helps improve resistance to corrosion, wear and everyday outdoor exposure.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eExhaust Tip Styling:\u003c\/strong\u003e Adds a more detailed and customized appearance to the original exhaust system.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eProtective Trim:\u003c\/strong\u003e Provides an additional outer layer around the exhaust tip area.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMultiple Color Options:\u003c\/strong\u003e Available in black, silver, red, blue, titanium and gold.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eModel-Specific Application:\u003c\/strong\u003e Designed for selected Zontes 368 series and 501G models.\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003eZontes 368G - 2024-2025\u003c\/li\u003e \u003cli\u003eZontes 368M - 2024-2025\u003c\/li\u003e \u003cli\u003eZontes 368K - 2024-2025\u003c\/li\u003e \u003cli\u003eZontes 368D - 2024-2025\u003c\/li\u003e \u003cli\u003eZontes 368E - 2024-2025\u003c\/li\u003e \u003cli\u003eZontes 501G - 2025-2026\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003ePlease confirm your motorcycle model, production year and original exhaust outlet shape before ordering.\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Exhaust Tip Cover \/ Tail Trim\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e CNC Aluminum Alloy\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSurface Finish:\u003c\/strong\u003e Anodized\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eColor Options:\u003c\/strong\u003e Black \/ Silver \/ Red \/ Blue \/ Titanium \/ Gold\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eInstallation Area:\u003c\/strong\u003e Original Exhaust Outlet\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Exhaust Styling \/ Protective Trim\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Zontes 368G \/ 368M \/ 368K \/ 368D \/ 368E \/ 501G\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch2\u003eDesign and Function\u003c\/h2\u003e\n\n\u003cp\u003e The exhaust outlet is a visible part of the motorcycle's rear profile. This CNC-machined cover adds a more refined metal detail to the end of the original exhaust while helping shield the surrounding tip area from minor cosmetic contact. \u003c\/p\u003e\n\n\u003cp\u003e The anodized finish provides several color choices, allowing the exhaust detail to be coordinated with other accessories on the motorcycle. \u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\n\u003col\u003e \u003cli\u003eAllow the motorcycle and exhaust system to cool completely.\u003c\/li\u003e \u003cli\u003eClean the original exhaust outlet and remove dirt or residue.\u003c\/li\u003e \u003cli\u003ePosition the exhaust tip cover over the corresponding original exhaust section.\u003c\/li\u003e \u003cli\u003eAlign the cover correctly with the exhaust outlet.\u003c\/li\u003e \u003cli\u003eInstall and tighten the corresponding mounting hardware securely.\u003c\/li\u003e \u003cli\u003eConfirm that the cover does not obstruct the exhaust outlet or contact surrounding components.\u003c\/li\u003e \u003cli\u003eRecheck the mounting after the first few rides.\u003c\/li\u003e \u003c\/ol\u003e\n\n\u003cp\u003e \u003cstrong\u003eImportant:\u003c\/strong\u003e Exhaust components become extremely hot during operation. Never install, adjust or touch the cover until the exhaust has cooled completely. \u003c\/p\u003e\n\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003eExhaust Tip Cover According to Selected Configuration\u003c\/li\u003e \u003c\/ul\u003e","brand":"Zontes Accessories","offers":[{"title":"Silver NO LOGO","offer_id":46568709652676,"sku":"14:100018786#Silver NO LOGO","price":45.9,"currency_code":"USD","in_stock":true},{"title":"Gold For ZONTES","offer_id":46568709685444,"sku":"14:200001438#Gold For ZONTES","price":45.9,"currency_code":"USD","in_stock":true},{"title":"Silver For ZONTES","offer_id":46568709718212,"sku":"14:365458#Silver For ZONTES","price":45.9,"currency_code":"USD","in_stock":true},{"title":"Titanium NO LOGO","offer_id":46568709750980,"sku":"14:200003699#Titanium NO LOGO","price":45.9,"currency_code":"USD","in_stock":true},{"title":"Black For ZONTES","offer_id":46568709783748,"sku":"14:200004891#Black For ZONTES","price":45.9,"currency_code":"USD","in_stock":true},{"title":"Gold NO LOGO","offer_id":46568709816516,"sku":"14:200001951#Gold NO LOGO","price":45.9,"currency_code":"USD","in_stock":true},{"title":"Titanium For ZONTES","offer_id":46568709849284,"sku":"14:200002130#Titanium For ZONTES","price":45.9,"currency_code":"USD","in_stock":true},{"title":"Red NO LOGO","offer_id":46568709882052,"sku":"14:193#Red NO LOGO","price":45.9,"currency_code":"USD","in_stock":true},{"title":"Black NO LOGO","offer_id":46568709914820,"sku":"14:200004890#Black NO LOGO","price":45.9,"currency_code":"USD","in_stock":true},{"title":"Red For ZONTES","offer_id":46568709947588,"sku":"14:200004889#Red For ZONTES","price":45.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3600\/7364\/files\/Zontes368G368M368K368D368E501GCNCExhaustTipCover.jpg?v=1788045769"},{"product_id":"368-350-310-abs-sensor-guard","title":"Zontes 368 350 310 Front Rear ABS Sensor Guard","description":"\u003cp\u003e Protect the front or rear wheel ABS sensor area of your Zontes motorcycle with this CNC aluminum protection guard. Designed for selected Zontes 368, 350 and 310 series models, it helps shield the ABS sensor mounting area from scratches, corrosion, wear and minor road debris while adding a clean, finished appearance. \u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eABS Sensor Protection:\u003c\/strong\u003e Helps protect the wheel ABS sensor area from scratches, wear, corrosion and minor external damage.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFront or Rear Installation:\u003c\/strong\u003e Suitable for compatible front or rear ABS sensor mounting positions depending on the motorcycle model.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCNC Aluminum Construction:\u003c\/strong\u003e Manufactured from billet aluminum and precision CNC machined for strength and accurate fitment.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eAnodized Finish:\u003c\/strong\u003e Helps improve corrosion resistance and maintain the appearance during regular riding conditions.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCompact Protective Design:\u003c\/strong\u003e Adds protection without creating unnecessary bulk around the wheel and braking components.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStyling Upgrade:\u003c\/strong\u003e Covers the exposed sensor mounting area for a cleaner and more customised appearance.\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003eZontes 368G\u003c\/li\u003e \u003cli\u003eZontes 368 Series\u003c\/li\u003e \u003cli\u003eZontes 350D\u003c\/li\u003e \u003cli\u003eZontes 350M\u003c\/li\u003e \u003cli\u003eZontes 350E\u003c\/li\u003e \u003cli\u003eZontes 350K\u003c\/li\u003e \u003cli\u003eZontes 350G\u003c\/li\u003e \u003cli\u003eZontes 350R\u003c\/li\u003e \u003cli\u003eZontes 350T\u003c\/li\u003e \u003cli\u003eZontes 350S\u003c\/li\u003e \u003cli\u003eZontes 350V\u003c\/li\u003e \u003cli\u003eZontes 310R\u003c\/li\u003e \u003cli\u003eZontes 310X\u003c\/li\u003e \u003cli\u003eZontes 310V\u003c\/li\u003e \u003cli\u003eZontes T310\u003c\/li\u003e \u003cli\u003eZontes ZT125\u003c\/li\u003e \u003cli\u003eZontes ZT250\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eImportant: This protector is only suitable for M6 screw mounting. Please confirm your motorcycle's ABS sensor mounting screw size before ordering.\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Front \/ Rear Wheel ABS Sensor Protection Guard\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e CNC Machined Aluminum Alloy\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMounting Screw Compatibility:\u003c\/strong\u003e M6\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eInstallation Area:\u003c\/strong\u003e Front or Rear Wheel ABS Sensor\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 Piece\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch2\u003eProtection and Function\u003c\/h2\u003e\n\n\u003cp\u003e ABS sensor components are positioned close to the wheel and braking system, where they can be exposed to moisture, dirt, road debris and accidental contact. This aluminum guard creates an additional protective layer around the sensor mounting area. \u003c\/p\u003e\n\n\u003cp\u003e The anodized CNC aluminum construction also helps resist corrosion while improving the appearance of the exposed mounting point. \u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\n\u003col\u003e \u003cli\u003ePark the motorcycle securely and switch off the ignition.\u003c\/li\u003e \u003cli\u003eLocate the ABS sensor mounting point on the front or rear wheel.\u003c\/li\u003e \u003cli\u003eConfirm that the existing mounting screw is M6.\u003c\/li\u003e \u003cli\u003ePosition the ABS sensor guard correctly over the mounting area.\u003c\/li\u003e \u003cli\u003eSecure the protector using the appropriate mounting hardware.\u003c\/li\u003e \u003cli\u003eCheck that the guard does not contact the ABS sensor ring, brake disc, caliper or wheel.\u003c\/li\u003e \u003cli\u003eRotate the wheel manually to confirm sufficient clearance before riding.\u003c\/li\u003e \u003c\/ol\u003e\n\n\u003cp\u003e \u003cstrong\u003eImportant:\u003c\/strong\u003e Incorrect installation may interfere with ABS or braking components. Always confirm adequate clearance after installation. \u003c\/p\u003e\n\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e1 x ABS Sensor Protection Guard\u003c\/li\u003e \u003c\/ul\u003e","brand":"Zontes Accessories","offers":[{"title":"Black FOR ZONTES","offer_id":46568710832324,"sku":"14:193#Black FOR ZONTES","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Gold-NO LOGO","offer_id":46568710865092,"sku":"14:29#Gold-NO LOGO","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Orange FOR ZONTES","offer_id":46568710897860,"sku":"14:173#Orange FOR ZONTES","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Orange-NO LOGO","offer_id":46568710930628,"sku":"14:1254#Orange-NO LOGO","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Blue-NO LOGO","offer_id":46568710963396,"sku":"14:100018786#Blue-NO LOGO","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Grey FOR ZONTES","offer_id":46568710996164,"sku":"14:365458#Grey FOR ZONTES","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Grey-NO LOGO","offer_id":46568711028932,"sku":"14:350852#Grey-NO LOGO","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Gold FOR ZONTES","offer_id":46568711061700,"sku":"14:350853#Gold FOR ZONTES","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Black-NO LOGO","offer_id":46568711094468,"sku":"14:200004890#Black-NO LOGO","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Red FOR ZONTES","offer_id":46568711127236,"sku":"14:200004891#Red FOR ZONTES","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Red-NO LOGO","offer_id":46568711160004,"sku":"14:200002130#Red-NO LOGO","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Blue FOR ZONTES","offer_id":46568711192772,"sku":"14:200001951#Blue FOR ZONTES","price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3600\/7364\/files\/S26eb917ff9f74698aee43e4b31d20c6ad.webp?v=1787607243"},{"product_id":"368-501g-brake-clutch-reservoir-caps","title":"Zontes 368G 368D 368E 368M 368K 501G Brake \u0026 Clutch Reservoir Caps","description":"\u003cp\u003e Upgrade the handlebar control area of your Zontes motorcycle with these CNC aluminum brake and clutch fluid reservoir caps. Designed for compatible Zontes 368 series and 501G models, they replace the original reservoir caps with a stronger, more distinctive aluminum finish. \u003c\/p\u003e\n\n\u003cp\u003e CNC-machined from high-density aluminum alloy, the caps combine lightweight construction with improved durability and are available in several anodized-style color options to complement your motorcycle. \u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eCNC Aluminum Construction:\u003c\/strong\u003e Machined from high-density aluminum alloy for strength, durability and a precise finished appearance.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBrake and Clutch Reservoir Upgrade:\u003c\/strong\u003e Designed for compatible front brake and clutch fluid reservoir positions depending on the selected configuration.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eModel-Specific Fit:\u003c\/strong\u003e Designed for compatible Zontes 368G, 368D, 368E, 368M, 368K and 501G models.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMultiple Color Options:\u003c\/strong\u003e Available in black, titanium, red, blue and gold.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eLightweight Design:\u003c\/strong\u003e Adds a premium metal finish without unnecessary weight or bulk.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDirect Replacement Style:\u003c\/strong\u003e Designed to replace the compatible original reservoir cap without permanent modification.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eClean Custom Appearance:\u003c\/strong\u003e Adds a more detailed and personalized finish to the handlebar control area.\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003eZontes 368G - 2024-2026\u003c\/li\u003e \u003cli\u003eZontes 368D - 2024-2026\u003c\/li\u003e \u003cli\u003eZontes 368E - 2024-2026\u003c\/li\u003e \u003cli\u003eZontes 368M - 2024-2026\u003c\/li\u003e \u003cli\u003eZontes 368K - 2024-2026\u003c\/li\u003e \u003cli\u003eZontes 501G - 2025-2026\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003ePlease confirm your motorcycle model, production year and original brake or clutch reservoir cap shape before ordering.\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Brake \/ Clutch Fluid Reservoir Cap\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e CNC High-Density Aluminum Alloy\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eColor Options:\u003c\/strong\u003e Black \/ Titanium \/ Red \/ Blue \/ Gold\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eInstallation Area:\u003c\/strong\u003e Front Brake \/ Clutch Fluid Reservoir\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eQuantity Options:\u003c\/strong\u003e 1 Piece \/ 2 Pieces Depending on Selected Variant\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Zontes 368G \/ 368D \/ 368E \/ 368M \/ 368K \/ 501G\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch2\u003eDesign and Function\u003c\/h2\u003e\n\n\u003cp\u003e The original fluid reservoir caps are positioned prominently around the handlebar controls and can become scratched or worn over time. These CNC aluminum replacements provide a more durable metal surface while refreshing the appearance of the cockpit area. \u003c\/p\u003e\n\n\u003cp\u003e Precision-machined aluminum construction provides a solid replacement solution while the available color options allow the caps to be coordinated with other motorcycle accessories. \u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\n\u003col\u003e \u003cli\u003ePark the motorcycle securely on a stable and level surface.\u003c\/li\u003e \u003cli\u003eKeep the corresponding brake or clutch fluid reservoir upright during installation.\u003c\/li\u003e \u003cli\u003eCarefully remove the original reservoir cap.\u003c\/li\u003e \u003cli\u003eRetain and correctly position the original diaphragm, seal and internal components where applicable.\u003c\/li\u003e \u003cli\u003ePosition the replacement cap and align the mounting points.\u003c\/li\u003e \u003cli\u003eInstall and tighten the hardware evenly without overtightening.\u003c\/li\u003e \u003cli\u003eCheck the reservoir carefully for correct sealing and any signs of fluid leakage.\u003c\/li\u003e \u003c\/ol\u003e\n\n\u003cp\u003e \u003cstrong\u003eImportant:\u003c\/strong\u003e Brake and clutch hydraulic systems are safety-critical. Avoid spilling brake fluid on painted or plastic surfaces and ensure the reservoir remains correctly sealed after installation. Professional installation is recommended if you are unfamiliar with motorcycle hydraulic systems. \u003c\/p\u003e\n\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e1 x Reservoir Cap or 2 x Reservoir Caps Depending on Selected Option\u003c\/li\u003e \u003c\/ul\u003e","brand":"Zontes Accessories","offers":[{"title":"1PC-Black 368","offer_id":46568713289924,"sku":"14:193#1PC-Black 368","price":22.9,"currency_code":"USD","in_stock":true},{"title":"2PC-Titanium NO LOGO","offer_id":46568713322692,"sku":"14:366#2PC-Titanium NO LOGO","price":42.9,"currency_code":"USD","in_stock":true},{"title":"2PC-Gold NO LOGO","offer_id":46568713355460,"sku":"14:1254#2PC-Gold NO LOGO","price":42.9,"currency_code":"USD","in_stock":true},{"title":"2PC-Titanium 368","offer_id":46568713388228,"sku":"14:496#2PC-Titanium 368","price":39.9,"currency_code":"USD","in_stock":true},{"title":"2PC-Red NO LOGO","offer_id":46568713420996,"sku":"14:173#2PC-Red NO LOGO","price":42.9,"currency_code":"USD","in_stock":true},{"title":"2PC-Gold 368","offer_id":46568713453764,"sku":"14:1052#2PC-Gold 368","price":39.9,"currency_code":"USD","in_stock":true},{"title":"2PC-Blue NO LOGO","offer_id":46568713486532,"sku":"14:10#2PC-Blue NO LOGO","price":39.9,"currency_code":"USD","in_stock":true},{"title":"2PC-Red 368","offer_id":46568713519300,"sku":"14:29#2PC-Red 368","price":39.9,"currency_code":"USD","in_stock":true},{"title":"2PC-Black NO LOGO","offer_id":46568713552068,"sku":"14:350852#2PC-Black NO LOGO","price":39.9,"currency_code":"USD","in_stock":true},{"title":"2PC-Blue 368","offer_id":46568713584836,"sku":"14:350853#2PC-Blue 368","price":39.9,"currency_code":"USD","in_stock":true},{"title":"1PC-Titanium NO LOGO","offer_id":46568713617604,"sku":"14:365458#1PC-Titanium NO LOGO","price":22.9,"currency_code":"USD","in_stock":true},{"title":"2PC-Black 368","offer_id":46568713650372,"sku":"14:350850#2PC-Black 368","price":39.9,"currency_code":"USD","in_stock":true},{"title":"1PC-Gold NO LOGO","offer_id":46568713683140,"sku":"14:200001438#1PC-Gold NO LOGO","price":22.9,"currency_code":"USD","in_stock":true},{"title":"1PC-Titanium 368","offer_id":46568713715908,"sku":"14:100018786#1PC-Titanium 368","price":22.9,"currency_code":"USD","in_stock":true},{"title":"1PC-Red NO LOGO","offer_id":46568713748676,"sku":"14:200002130#1PC-Red NO LOGO","price":22.9,"currency_code":"USD","in_stock":true},{"title":"1PC-Gold 368","offer_id":46568713781444,"sku":"14:200001951#1PC-Gold 368","price":22.9,"currency_code":"USD","in_stock":true},{"title":"1PC-Blue NO LOGO","offer_id":46568713814212,"sku":"14:200004891#1PC-Blue NO LOGO","price":22.9,"currency_code":"USD","in_stock":true},{"title":"1PC-Red 368","offer_id":46568713846980,"sku":"14:200003699#1PC-Red 368","price":22.9,"currency_code":"USD","in_stock":true},{"title":"1PC-Black NO LOGO","offer_id":46568713879748,"sku":"14:200004889#1PC-Black NO LOGO","price":22.9,"currency_code":"USD","in_stock":true},{"title":"1PC-Blue 368","offer_id":46568713912516,"sku":"14:200004890#1PC-Blue 368","price":22.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3600\/7364\/files\/Sa62810e0fc704bbe9ec2e8f84a59cb3fW.webp?v=1787607248"},{"product_id":"universal-25mm-crash-bar-protection-blocks","title":"Zontes Universal 25mm Crash Bar Protection Blocks","description":"\u003cp\u003e Add an extra contact layer to compatible 25 mm motorcycle crash bars with these compact protection blocks. Designed to mount directly onto the crash bar tubing, they help reduce direct abrasion and scratching of the metal crash bar during minor drops, parking incidents or low-speed sliding contact. \u003c\/p\u003e\n\n\u003cp\u003e The lightweight aluminum construction provides a durable mounting solution without adding unnecessary bulk and is suitable for a wide range of Zontes motorcycles equipped with compatible 25 mm crash bars. \u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eCrash Bar Protection:\u003c\/strong\u003e Helps reduce direct contact between the motorcycle crash bar and the ground during minor drops or sliding contact.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eUniversal 25 mm Fit:\u003c\/strong\u003e Designed for motorcycle crash bars with approximately 25 mm outer tube diameter.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eAluminum Construction:\u003c\/strong\u003e Lightweight metal construction provides durable support for regular motorcycle use.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePair Configuration:\u003c\/strong\u003e Supplied as a pair for installation on corresponding crash bar contact areas.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCompact Design:\u003c\/strong\u003e Adds practical protection without significantly increasing the size or weight of the crash bar system.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBlack Finish:\u003c\/strong\u003e Clean appearance designed to blend with most motorcycle protection bars.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e Clamp-style mounting allows installation onto compatible crash bar tubing.\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003e This is a \u003cstrong\u003euniversal accessory\u003c\/strong\u003e and is not manufactured specifically for one Zontes model. It can be used on motorcycles equipped with compatible crash bars measuring approximately 25 mm in outer diameter. \u003c\/p\u003e\n\n\u003cp\u003ePotential applications may include compatible crash bar setups on:\u003c\/p\u003e\n\n\u003cul\u003e \u003cli\u003eZontes 368G\u003c\/li\u003e \u003cli\u003eZontes 368E\u003c\/li\u003e \u003cli\u003eZontes 368K\u003c\/li\u003e \u003cli\u003eZontes 368M\u003c\/li\u003e \u003cli\u003eZontes 350E\u003c\/li\u003e \u003cli\u003eZontes G1 125\u003c\/li\u003e \u003cli\u003eZontes G1 150\u003c\/li\u003e \u003cli\u003eZontes 125U\u003c\/li\u003e \u003cli\u003eZontes 310T\u003c\/li\u003e \u003cli\u003eZontes 310X\u003c\/li\u003e \u003cli\u003eZontes 703F\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eCompatibility depends entirely on the installed crash bar. Measure the outer diameter of your crash bar before ordering. The required diameter is approximately 25 mm.\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Crash Bar Protection Block \/ Bumper Guard\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCompatible Tube Diameter:\u003c\/strong\u003e Approx. 25 mm\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eInstallation Area:\u003c\/strong\u003e Motorcycle Crash Bar \/ Engine Guard\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFitment Type:\u003c\/strong\u003e Universal\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 Pair \/ 2 Pieces\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch2\u003eProtection and Function\u003c\/h2\u003e\n\n\u003cp\u003e Crash bars are designed to become an external contact point during a motorcycle drop, which can leave scratches and abrasion on the metal tubing. These protection blocks create an additional contact surface at selected areas of the crash bar to help reduce direct wear on the bar itself. \u003c\/p\u003e\n\n\u003cp\u003e Their compact construction also makes them suitable for riders who want additional crash bar protection without installing large or visually intrusive accessories. \u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\n\u003col\u003e \u003cli\u003ePark the motorcycle securely on a stable surface.\u003c\/li\u003e \u003cli\u003eMeasure the crash bar tubing and confirm an outer diameter of approximately 25 mm.\u003c\/li\u003e \u003cli\u003eSelect a suitable contact area on the crash bar.\u003c\/li\u003e \u003cli\u003ePosition the protection block around the tubing.\u003c\/li\u003e \u003cli\u003eInstall the supplied mounting hardware and align the block correctly.\u003c\/li\u003e \u003cli\u003eTighten the hardware evenly and securely.\u003c\/li\u003e \u003cli\u003eCheck that the blocks do not interfere with engine components, body panels, rider controls or normal motorcycle operation.\u003c\/li\u003e \u003c\/ol\u003e\n\n\u003cp\u003e \u003cstrong\u003eImportant:\u003c\/strong\u003e These blocks are intended to help reduce cosmetic damage to compatible crash bars and cannot prevent all motorcycle damage during a fall or collision. Recheck the mounting hardware periodically, especially after off-road use or a motorcycle drop. \u003c\/p\u003e\n\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e2 x Crash Bar Protection Blocks\u003c\/li\u003e \u003cli\u003e1 x Mounting Screw Kit\u003c\/li\u003e \u003c\/ul\u003e","brand":"Zontes Accessories","offers":[{"title":"ZONTES","offer_id":46568713978052,"sku":"14:200004889#ZONTES","price":29.9,"currency_code":"USD","in_stock":true},{"title":"short NO LOGO","offer_id":46568714010820,"sku":"14:200004890#short NO LOGO","price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3600\/7364\/files\/Scf3667753ce442efb18747329e61d7caY.webp?v=1787607247"},{"product_id":"368-703-front-abs-sensor-guard","title":"Zontes 368G 368E 368D 368M 368K 703 ABS Sensor Guard","description":"\u003cp\u003e\n  Protect the front wheel ABS sensor area of your Zontes motorcycle with this aluminum alloy protection guard. Designed for selected Zontes 368 and 703 series models, it helps reduce the risk of scratches, impacts and damage caused by stones, dirt and road debris.\n\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eABS Sensor Protection:\u003c\/strong\u003e Helps shield the front wheel ABS sensor and surrounding area from minor impacts, stones and road debris.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAluminum Alloy Construction:\u003c\/strong\u003e Lightweight and durable material suitable for everyday motorcycle use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel-Specific Fit:\u003c\/strong\u003e Designed for compatible Zontes 368 and 703 series motorcycles.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProtective Design:\u003c\/strong\u003e Adds an additional barrier around the exposed ABS sensor area without interfering with normal operation when installed correctly.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClean Appearance:\u003c\/strong\u003e Compact design complements the motorcycle's original front wheel styling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo Permanent Modification Required:\u003c\/strong\u003e Designed for straightforward installation using the existing mounting area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eZontes 368G\u003c\/li\u003e\n  \u003cli\u003eZontes 368E\u003c\/li\u003e\n  \u003cli\u003eZontes 368D\u003c\/li\u003e\n  \u003cli\u003eZontes 368M\u003c\/li\u003e\n  \u003cli\u003eZontes 368K\u003c\/li\u003e\n  \u003cli\u003eZontes 703R\u003c\/li\u003e\n  \u003cli\u003eZontes 703F\u003c\/li\u003e\n  \u003cli\u003eZontes 703T\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\n  \u003cstrong\u003ePlease check your motorcycle model and front ABS sensor mounting area before ordering.\u003c\/strong\u003e\n\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Front Wheel ABS Sensor Protection Guard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum Alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Area:\u003c\/strong\u003e Front Wheel ABS Sensor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Lightweight and Durable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProtection and Function\u003c\/h2\u003e\n\n\u003cp\u003e\n  The front wheel ABS sensor is positioned close to the wheel and braking system, where it may be exposed to dirt, stones and accidental contact. This guard provides an additional layer of protection around the sensor area and helps reduce the risk of external damage during everyday riding.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  Its aluminum alloy construction offers a balance between strength and low weight while maintaining a compact appearance around the front wheel assembly.\n\u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\n\u003col\u003e\n  \u003cli\u003ePark the motorcycle securely and switch off the ignition.\u003c\/li\u003e\n  \u003cli\u003eLocate the front wheel ABS sensor and corresponding mounting area.\u003c\/li\u003e\n  \u003cli\u003ePosition the protection guard and align the mounting points.\u003c\/li\u003e\n  \u003cli\u003eSecure the guard using the appropriate mounting hardware.\u003c\/li\u003e\n  \u003cli\u003eCheck that the guard does not contact the ABS sensor ring, brake disc, caliper or wheel.\u003c\/li\u003e\n  \u003cli\u003eRotate the wheel manually to confirm sufficient clearance before riding.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\n  \u003cstrong\u003eImportant:\u003c\/strong\u003e The guard must not interfere with the ABS sensor, sensor ring, brake components or wheel movement. Recheck installation and clearance before operating the motorcycle.\n\u003c\/p\u003e\n\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 x Front ABS Sensor Protection Guard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zontes Accessories","offers":[{"title":"Blue-nologo","offer_id":46568719810756,"sku":"14:10#Blue-nologo","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Gold-nologo","offer_id":46568719843524,"sku":"14:29#Gold-nologo","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Gold-368","offer_id":46568719876292,"sku":"14:365458#Gold-368","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Black-nologo","offer_id":46568719909060,"sku":"14:350850#Black-nologo","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Red-nologo","offer_id":46568719941828,"sku":"14:350852#Red-nologo","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Grey-nologo","offer_id":46568719974596,"sku":"14:350853#Grey-nologo","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Black-368","offer_id":46568720007364,"sku":"14:200002130#Black-368","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Red-368","offer_id":46568720040132,"sku":"14:200001951#Red-368","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Grey-368","offer_id":46568720072900,"sku":"14:200001438#Grey-368","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Blue-368","offer_id":46568720105668,"sku":"14:100018786#Blue-368","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Red-703","offer_id":46568720138436,"sku":"14:200004889#Red-703","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Grey-703","offer_id":46568720171204,"sku":"14:200004890#Grey-703","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Blue-703","offer_id":46568720203972,"sku":"14:200004891#Blue-703","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Gold-703","offer_id":46568720236740,"sku":"14:200003699#Gold-703","price":42.9,"currency_code":"USD","in_stock":true},{"title":"Black-703","offer_id":46568720269508,"sku":"14:193#Black-703","price":42.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3600\/7364\/files\/Scce2c755aa9c4182a6770f6b320e9087q.webp?v=1787607266"},{"product_id":"368e-368d-368m-368g-368k-air-filter","title":"Zontes 368E 368D 368M 368G 368K High-Flow Air Filter","description":"\u003cp\u003e Keep your Zontes scooter's intake system clean and efficient with this high-flow replacement air filter. Designed for selected Zontes 368 series models, it helps filter dust, dirt and airborne particles before they reach the engine while supporting proper airflow for everyday riding. \u003c\/p\u003e \u003ch2\u003eKey Features\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eHigh-Flow Air Filter:\u003c\/strong\u003e Designed to support clean and consistent airflow to the engine.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEngine Protection:\u003c\/strong\u003e Helps reduce the amount of dust, dirt and debris entering the intake system.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eRoutine Maintenance Part:\u003c\/strong\u003e Ideal for replacing a worn or dirty original air filter.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFilter Paper Construction:\u003c\/strong\u003e Uses a pleated paper filter element for effective air filtration.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDirect Replacement Fit:\u003c\/strong\u003e Designed for compatible Zontes 368 series models.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSupports Daily Performance:\u003c\/strong\u003e A clean air filter helps maintain proper intake airflow and smoother engine operation.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eZontes 368E - 2024-2026\u003c\/li\u003e \u003cli\u003eZontes 368D - 2024-2026\u003c\/li\u003e \u003cli\u003eZontes 368M - 2024-2026\u003c\/li\u003e \u003cli\u003eZontes 368G - 2024-2026\u003c\/li\u003e \u003cli\u003eZontes 368K - 2024-2026\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003ePlease compare the shape and dimensions of your current air filter before ordering.\u003c\/strong\u003e \u003c\/p\u003e \u003ch2\u003eSpecifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Engine Air Filter \/ Intake Filter Element\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Filter Paper\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eInstallation Area:\u003c\/strong\u003e Air Intake \/ Airbox\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Zontes 368E, 368D, 368M, 368G, 368K\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhy Replace the Air Filter?\u003c\/h2\u003e \u003cp\u003e The engine continuously draws air through the intake system while running. Over time, the original filter can become clogged with dust and debris, which may reduce airflow and affect overall running performance. \u003c\/p\u003e \u003cp\u003e Replacing the air filter at regular service intervals helps maintain cleaner intake air and supports long-term engine protection. \u003c\/p\u003e \u003ch2\u003eInstallation\u003c\/h2\u003e \u003col\u003e \u003cli\u003eSwitch off the motorcycle and allow the engine to cool.\u003c\/li\u003e \u003cli\u003eOpen the airbox according to your model's service procedure.\u003c\/li\u003e \u003cli\u003eRemove the old air filter carefully.\u003c\/li\u003e \u003cli\u003eClean any loose dust from the airbox.\u003c\/li\u003e \u003cli\u003eInstall the new air filter in the correct position.\u003c\/li\u003e \u003cli\u003eClose the airbox securely before starting the engine.\u003c\/li\u003e \u003c\/ol\u003e \u003cp\u003e \u003cstrong\u003eImportant:\u003c\/strong\u003e Never run the motorcycle without an air filter installed. Make sure the filter is seated correctly and the airbox is fully closed before use. \u003c\/p\u003e \u003ch2\u003ePackage Includes\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1 x High-Flow Air Filter\u003c\/li\u003e \u003c\/ul\u003e","brand":"Zontes Accessories","offers":[{"title":"AC - 2 PCS","offer_id":46568720761028,"sku":"14:366#AC - 2 PCS","price":49.9,"currency_code":"USD","in_stock":true},{"title":"ABC - 24-25","offer_id":46568720793796,"sku":"14:200002130#ABC - 24-25","price":52.9,"currency_code":"USD","in_stock":true},{"title":"AB - 24-25","offer_id":46568720826564,"sku":"14:200003699#AB - 24-25","price":49.9,"currency_code":"USD","in_stock":true},{"title":"AB - 2026","offer_id":46568720859332,"sku":"14:173#AB - 2026","price":49.9,"currency_code":"USD","in_stock":true},{"title":"A - Air Filter","offer_id":46568720892100,"sku":"14:200004889#A - Air Filter","price":44.9,"currency_code":"USD","in_stock":true},{"title":"BB - 2026","offer_id":46568720924868,"sku":"14:10#BB - 2026","price":44.9,"currency_code":"USD","in_stock":true},{"title":"BB - 24-25","offer_id":46568720957636,"sku":"14:200001438#BB - 24-25","price":44.9,"currency_code":"USD","in_stock":true},{"title":"2026 - 3 PCS","offer_id":46568720990404,"sku":"14:350853#2026 - 3 PCS","price":59.9,"currency_code":"USD","in_stock":true},{"title":"CCC - 3 PCS","offer_id":46568721023172,"sku":"14:350850#CCC - 3 PCS","price":39.9,"currency_code":"USD","in_stock":true},{"title":"2026 - 2 PCS","offer_id":46568721055940,"sku":"14:29#2026 - 2 PCS","price":59.9,"currency_code":"USD","in_stock":true},{"title":"ABC - 2026","offer_id":46568721088708,"sku":"14:350852#ABC - 2026","price":52.9,"currency_code":"USD","in_stock":true},{"title":"2024-2025 - 2 PCS","offer_id":46568721121476,"sku":"14:200004890#2024-2025 - 2 PCS","price":59.9,"currency_code":"USD","in_stock":true},{"title":"High-Flow","offer_id":46568721154244,"sku":"14:200004891#High-Flow","price":53.9,"currency_code":"USD","in_stock":true},{"title":"2024-2025 -3 PCS","offer_id":46568721187012,"sku":"14:365458#2024-2025 -3 PCS","price":59.9,"currency_code":"USD","in_stock":true},{"title":"High-Flow-C - 2PCS","offer_id":46568721219780,"sku":"14:100018786#High-Flow-C - 2PCS","price":53.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3600\/7364\/files\/Zontes368E368D368M368G368KHigh-FlowAirFilter.jpg?v=1788044442"},{"product_id":"universal-zontes-windshield-extension-deflector","title":"Universal Adjustable Windshield Extension Deflector for Zontes","description":"\u003cp\u003e\n  Improve wind protection and riding comfort with this universal adjustable windshield extension. Designed to clamp onto an existing motorcycle windscreen, the spoiler helps redirect airflow over the rider and can reduce wind pressure and turbulence at higher speeds.\n\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable Wind Deflection:\u003c\/strong\u003e Allows the angle of the extension to be adjusted according to riding position and windscreen height.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImproved Riding Comfort:\u003c\/strong\u003e Helps reduce direct wind pressure, turbulence and wind noise during higher-speed riding.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal Fit:\u003c\/strong\u003e Suitable for many motorcycles, touring bikes, adventure motorcycles, street bikes and scooters equipped with a compatible windscreen.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClamp-On Installation:\u003c\/strong\u003e Mounts directly onto the existing windscreen without requiring permanent modifications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable ABS Construction:\u003c\/strong\u003e Lightweight ABS plastic suitable for regular motorcycle use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable Mounting Hardware:\u003c\/strong\u003e Allows the extension position and angle to be fine-tuned after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003e\n  This is a universal accessory and is not designed for one specific Zontes model. It can be used with many Zontes motorcycles equipped with a suitable original or aftermarket windscreen.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  \u003cstrong\u003eThe extension must be mounted to an existing windscreen. Please check the shape, thickness and available mounting area of your windscreen before ordering.\u003c\/strong\u003e\n\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Windshield Extension \/ Windscreen Deflector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ABS Plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Clamp-On\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Adjustable Angle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor Options:\u003c\/strong\u003e Light Smoke \/ Transparent\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e 0.4 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 Piece\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWind Protection\u003c\/h2\u003e\n\n\u003cp\u003e\n  The extension adds extra height to the upper section of the motorcycle windscreen and redirects incoming airflow. Depending on the motorcycle, windscreen and rider position, this can help reduce wind pressure around the helmet and upper body.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  The adjustable design allows the spoiler angle to be changed to find a suitable balance between airflow, visibility and riding comfort.\n\u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\n\u003col\u003e\n  \u003cli\u003eClean the upper section of the existing windscreen before installation.\u003c\/li\u003e\n  \u003cli\u003ePosition the extension at the desired location.\u003c\/li\u003e\n  \u003cli\u003eAttach the clamp mounting system to the windscreen.\u003c\/li\u003e\n  \u003cli\u003eAdjust the extension height and angle.\u003c\/li\u003e\n  \u003cli\u003eTighten the mounting hardware evenly without applying excessive pressure to the windscreen.\u003c\/li\u003e\n  \u003cli\u003eCheck that the extension is secure and does not obstruct the rider's view.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\n  \u003cstrong\u003eImportant:\u003c\/strong\u003e Do not overtighten the clamps, as excessive pressure may damage the original windscreen. Check all mounting hardware periodically, especially after long-distance or high-speed riding.\n\u003c\/p\u003e\n\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 x Adjustable Windshield Extension\u003c\/li\u003e\n  \u003cli\u003eClamp-On Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zontes Accessories","offers":[{"title":"A  Light Smoke","offer_id":46568721678532,"sku":"14:200004890#A  Light Smoke","price":37.9,"currency_code":"USD","in_stock":true},{"title":"Transparent S","offer_id":46568721711300,"sku":"14:496#Transparent S","price":67.5,"currency_code":"USD","in_stock":true},{"title":"Light Smoke S","offer_id":46568721744068,"sku":"14:366#Light Smoke S","price":67.5,"currency_code":"USD","in_stock":true},{"title":"Transparent M","offer_id":46568721776836,"sku":"14:771#Transparent M","price":67.5,"currency_code":"USD","in_stock":true},{"title":"Light Smoke M","offer_id":46568721809604,"sku":"14:691#Light Smoke M","price":67.5,"currency_code":"USD","in_stock":true},{"title":"Transparent","offer_id":46568721842372,"sku":"14:1254#Transparent","price":67.5,"currency_code":"USD","in_stock":true},{"title":"Light Smoke","offer_id":46568721875140,"sku":"14:1052#Light Smoke","price":67.5,"currency_code":"USD","in_stock":true},{"title":"A  Light Smoke S","offer_id":46568721907908,"sku":"14:100018786#A  Light Smoke S","price":37.9,"currency_code":"USD","in_stock":true},{"title":"A  Transparent","offer_id":46568721940676,"sku":"14:200002130#A  Transparent","price":37.9,"currency_code":"USD","in_stock":true},{"title":"A  Transparent M","offer_id":46568721973444,"sku":"14:200004889#A  Transparent M","price":37.9,"currency_code":"USD","in_stock":true},{"title":"A Transparent S","offer_id":46568722006212,"sku":"14:350850#A Transparent S","price":37.9,"currency_code":"USD","in_stock":true},{"title":"A  Light Smoke M","offer_id":46568722038980,"sku":"14:200004891#A  Light Smoke M","price":37.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3600\/7364\/files\/S57e1683d37284dac8ec5f535f14e5071S.webp?v=1787607274"},{"product_id":"368-703-front-axle-sliders","title":"Zontes 368G 368D 368M 368E 368K 703 Front Axle Sliders","description":"\u003cp\u003e Add extra protection to the front axle and fork area of your Zontes motorcycle with this front axle slider set. Designed for selected Zontes 368 and 703 series models, the sliders help reduce direct contact damage during low-speed drops, slides or accidental impacts. \u003c\/p\u003e \u003ch2\u003eKey Features\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eFront Axle Protection:\u003c\/strong\u003e Helps protect the front axle and surrounding fork area during drops, slides and minor impacts.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDual-Side Protection:\u003c\/strong\u003e Slider structure protects both sides of the front axle for wider coverage.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePOM Slider Construction:\u003c\/strong\u003e High-strength POM material is designed to absorb abrasion and help reduce direct contact damage.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCNC Aluminum Components:\u003c\/strong\u003e Precision-machined aluminum alloy provides strength and secure mounting.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSteel Rod Mounting System:\u003c\/strong\u003e Connects both sides of the front axle for stable installation.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMultiple Color Options:\u003c\/strong\u003e Available in black, red and blue depending on the selected variant.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eModel-Specific Fit:\u003c\/strong\u003e Designed specifically for compatible Zontes 368 and 703 series motorcycles.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eZontes 368D - 2024-2026\u003c\/li\u003e \u003cli\u003eZontes 368M - 2024-2026\u003c\/li\u003e \u003cli\u003eZontes 368E - 2024-2026\u003c\/li\u003e \u003cli\u003eZontes 368K - 2024-2026\u003c\/li\u003e \u003cli\u003eZontes 368G - 2024-2026\u003c\/li\u003e \u003cli\u003eZontes 703RR - 2024-2026\u003c\/li\u003e \u003cli\u003eZontes 703R - 2025-2026\u003c\/li\u003e \u003cli\u003eZontes 703T - 2026\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003ePlease check your motorcycle model and production year carefully before ordering.\u003c\/strong\u003e \u003c\/p\u003e \u003ch2\u003eSpecifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Front Axle Slider \/ Wheel Protector\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e POM and CNC Machined Aluminum Alloy\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMounting System:\u003c\/strong\u003e Steel Rod\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eInstallation Position:\u003c\/strong\u003e Front Axle\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eColor Options:\u003c\/strong\u003e Black \/ Red \/ Blue\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e 0.29 kg\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 Front Set\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eProtection and Function\u003c\/h2\u003e \u003cp\u003e The front axle and lower fork area can contact the ground during a low-speed drop or slide. These axle sliders create an additional contact point that can help reduce scratches, abrasion and direct impact damage to the original components. \u003c\/p\u003e \u003cp\u003e The combination of POM sliders and CNC-machined aluminum components provides a balance of abrasion resistance, strength and low weight. \u003c\/p\u003e \u003ch2\u003eInstallation\u003c\/h2\u003e \u003col\u003e \u003cli\u003ePark the motorcycle securely on a stable surface.\u003c\/li\u003e \u003cli\u003ePosition the slider components on both sides of the front axle.\u003c\/li\u003e \u003cli\u003ePass the mounting rod through the appropriate axle area.\u003c\/li\u003e \u003cli\u003eInstall the opposite slider and mounting hardware.\u003c\/li\u003e \u003cli\u003eTighten both sides evenly and securely.\u003c\/li\u003e \u003cli\u003eCheck that the sliders do not interfere with the wheel, brake disc, caliper or ABS components.\u003c\/li\u003e \u003c\/ol\u003e \u003cp\u003e \u003cstrong\u003eImportant:\u003c\/strong\u003e After installation, rotate the front wheel and check steering movement to confirm there is no interference with braking, ABS or suspension components. Installation instructions are not included. \u003c\/p\u003e \u003ch2\u003ePackage Includes\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1 x Front Axle Slider Set\u003c\/li\u003e \u003cli\u003eMounting Hardware\u003c\/li\u003e \u003c\/ul\u003e","brand":"Zontes Accessories","offers":[{"title":"Black","offer_id":46568722137284,"sku":"14:193","price":39.9,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":46568722170052,"sku":"14:173","price":39.9,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":46568722202820,"sku":"14:10","price":39.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3600\/7364\/files\/S538b0d6dd54e4d59a95b4c16fb386fb2I.webp?v=1787607275"},{"product_id":"703-368-350-310-front-axle-dust-plugs","title":"Zontes 703 368 350 310 Front Axle Dust Plugs","description":"\u003cp\u003e Protect the exposed front axle openings of your Zontes motorcycle with this two-piece silicone dust plug set. Designed for selected Zontes 703, 368, 350, 310 and 150 series models, the plugs help prevent dust, mud, water and road debris from entering the front axle area while giving the wheel assembly a cleaner appearance. \u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eDust and Debris Protection:\u003c\/strong\u003e Helps block dust, sand, mud, gravel and other small debris from entering the exposed front axle holes.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWater and Moisture Protection:\u003c\/strong\u003e Helps reduce the entry of rainwater and moisture into the axle area.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHelps Prevent Corrosion:\u003c\/strong\u003e By covering exposed openings, the plugs help reduce dirt and moisture buildup around metal components.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFlexible Silicone Construction:\u003c\/strong\u003e High-elasticity silicone provides a secure push-fit while remaining easy to remove when required.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eTool-Free Installation:\u003c\/strong\u003e Simply press each plug into the corresponding axle opening - no screws, adhesive or permanent modification required.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eLightweight Design:\u003c\/strong\u003e Compact construction adds virtually no noticeable weight to the motorcycle.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eClean Factory-Style Appearance:\u003c\/strong\u003e Covers exposed axle holes for a neater and more finished front wheel appearance.\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003eZontes 703T\u003c\/li\u003e \u003cli\u003eZontes 703RR\u003c\/li\u003e \u003cli\u003eZontes 703R\u003c\/li\u003e \u003cli\u003eZontes 368D\u003c\/li\u003e \u003cli\u003eZontes 368M\u003c\/li\u003e \u003cli\u003eZontes 368E\u003c\/li\u003e \u003cli\u003eZontes 368K\u003c\/li\u003e \u003cli\u003eZontes 368G\u003c\/li\u003e \u003cli\u003eZontes 350D\u003c\/li\u003e \u003cli\u003eZontes 350M\u003c\/li\u003e \u003cli\u003eZontes 350E\u003c\/li\u003e \u003cli\u003eZontes 350R\u003c\/li\u003e \u003cli\u003eZontes 350V\u003c\/li\u003e \u003cli\u003eZontes 350S\u003c\/li\u003e \u003cli\u003eZontes 350T\u003c\/li\u003e \u003cli\u003eZontes 350X\u003c\/li\u003e \u003cli\u003eZontes 350VX\u003c\/li\u003e \u003cli\u003eZontes GK350\u003c\/li\u003e \u003cli\u003eZontes 310M\u003c\/li\u003e \u003cli\u003eZontes 310R\u003c\/li\u003e \u003cli\u003eZontes 310V\u003c\/li\u003e \u003cli\u003eZontes 310T\u003c\/li\u003e \u003cli\u003eZontes 310X\u003c\/li\u003e \u003cli\u003eZontes 150D\u003c\/li\u003e \u003cli\u003eZontes 150M\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003ePlease check your motorcycle model and compare the front axle opening shape before ordering.\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Front Axle Dust Plug \/ Axle Hole Cover\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Silicone Rubber\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eInstallation Position:\u003c\/strong\u003e Front Axle Hole\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e 12-13 g per pair\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 Pieces\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tool-Free Push Fit\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch2\u003eProtection and Function\u003c\/h2\u003e\n\n\u003cp\u003e Exposed front axle openings can collect dust, mud, water and small road debris during normal riding. Over time, this can make the axle area harder to keep clean and may contribute to moisture buildup around exposed metal surfaces. \u003c\/p\u003e\n\n\u003cp\u003e These silicone plugs fit into the axle openings to create a simple protective barrier while maintaining a discreet appearance. Their flexible construction allows them to stay securely positioned under normal road vibration. \u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\n\u003col\u003e \u003cli\u003eClean the front axle openings and remove any loose dirt or moisture.\u003c\/li\u003e \u003cli\u003eCheck that each plug matches the corresponding axle opening.\u003c\/li\u003e \u003cli\u003ePress each silicone plug firmly into place by hand.\u003c\/li\u003e \u003cli\u003eConfirm that both plugs are seated securely and evenly.\u003c\/li\u003e \u003cli\u003eCheck the plugs periodically during routine motorcycle maintenance.\u003c\/li\u003e \u003c\/ol\u003e\n\n\u003cp\u003e \u003cstrong\u003eImportant:\u003c\/strong\u003e No glue, screws or permanent modifications are required. Do not force the plugs into an incompatible opening. \u003c\/p\u003e\n\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e2 x Front Axle Dust Plugs\u003c\/li\u003e \u003c\/ul\u003e","brand":"Zontes Accessories","offers":[{"title":"Default Title","offer_id":46568722399428,"sku":"14:193#1 pair","price":12.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3600\/7364\/files\/Zontes703368350310FrontAxleDustPlugs.jpg?v=1788044199"},{"product_id":"150-350-368-shock-absorber-protective-cover","title":"Zontes 150D 150M 350D 350M 350E 368D 368M 368E Shock Cover","description":"\u003cp\u003e Protect your motorcycle's shock absorber from mud, dust, water and road debris with this waterproof shock absorber protective cover. Designed for selected Zontes 150, 350 and 368 series models, it helps keep the suspension area cleaner while adding an extra layer of protection during everyday and adventure riding. \u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eShock Absorber Protection:\u003c\/strong\u003e Helps shield the suspension spring and shock absorber from mud, gravel, dust and road debris.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWaterproof Fabric:\u003c\/strong\u003e Provides additional protection against rain, splashes and wet riding conditions.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDust Protection:\u003c\/strong\u003e Helps reduce dirt accumulation around the shock absorber and spring.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHook-and-Loop Closure:\u003c\/strong\u003e Allows quick installation and removal without dismantling the suspension.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eTwo Size Options:\u003c\/strong\u003e Available in 27 cm and 35 cm versions for different shock absorber dimensions.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEasy Maintenance:\u003c\/strong\u003e Removable design makes the cover easier to clean when required.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eProtective Styling:\u003c\/strong\u003e Covers the exposed suspension spring for a cleaner and more finished appearance.\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003eZontes 150D\u003c\/li\u003e \u003cli\u003eZontes 150M\u003c\/li\u003e \u003cli\u003eZontes 350D\u003c\/li\u003e \u003cli\u003eZontes 350M\u003c\/li\u003e \u003cli\u003eZontes 350E\u003c\/li\u003e \u003cli\u003eZontes 368D\u003c\/li\u003e \u003cli\u003eZontes 368M\u003c\/li\u003e \u003cli\u003eZontes 368E\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003ePlease measure your shock absorber before ordering, as the correct cover size depends on both its length and diameter.\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003ch2\u003eSize Options\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003e27 cm Version:\u003c\/strong\u003e Suitable for shock absorbers up to 27 cm long and approximately 6.5 cm in diameter.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003e35 cm Version:\u003c\/strong\u003e Suitable for shock absorbers up to 35 cm long and approximately 8.5 cm in diameter.\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003cp\u003e Do not select a cover smaller than the dimensions of your motorcycle's shock absorber. \u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Shock Absorber Protective Cover\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Waterproof Fabric\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eAvailable Lengths:\u003c\/strong\u003e 27 cm \/ 35 cm\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eClosure Type:\u003c\/strong\u003e Hook-and-Loop Fastener\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eInstallation Area:\u003c\/strong\u003e Shock Absorber \/ Suspension Spring\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e 0.1 kg\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch2\u003eProtection and Function\u003c\/h2\u003e\n\n\u003cp\u003e Motorcycle shock absorbers are exposed to water, dust, mud and small stones during normal riding. Over time, these contaminants can accumulate around the spring and suspension components. \u003c\/p\u003e\n\n\u003cp\u003e This protective cover wraps around the shock absorber to provide an additional barrier against outdoor riding conditions while helping keep the suspension area cleaner. \u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\n\u003col\u003e \u003cli\u003eMeasure the length and diameter of your shock absorber before installation.\u003c\/li\u003e \u003cli\u003eSelect the appropriate 27 cm or 35 cm cover.\u003c\/li\u003e \u003cli\u003eClean loose dirt from the shock absorber and spring area.\u003c\/li\u003e \u003cli\u003eWrap the protective cover around the shock absorber.\u003c\/li\u003e \u003cli\u003eSecure the cover using the integrated hook-and-loop closure.\u003c\/li\u003e \u003cli\u003eCheck that the cover is securely positioned and does not interfere with suspension movement.\u003c\/li\u003e \u003c\/ol\u003e\n\n\u003cp\u003e \u003cstrong\u003eImportant:\u003c\/strong\u003e After installation, make sure the cover does not restrict suspension travel or contact nearby moving, braking or exhaust components. \u003c\/p\u003e\n\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e1 x Shock Absorber Protective Cover\u003c\/li\u003e \u003c\/ul\u003e","brand":"Zontes Accessories","offers":[{"title":"HX27cm","offer_id":46568724725956,"sku":"14:29#HX27cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"FX35cm","offer_id":46568724758724,"sku":"14:10#FX35cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"DX35cm","offer_id":46568724791492,"sku":"14:350853#DX35cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"HX35cm","offer_id":46568724824260,"sku":"14:350852#HX35cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"A1X27cm","offer_id":46568724857028,"sku":"14:1052#A1X27cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"IX35cm","offer_id":46568724889796,"sku":"14:13978534#IX35cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"IX27cm","offer_id":46568724922564,"sku":"14:771#IX27cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"GX35cm","offer_id":46568724955332,"sku":"14:173#GX35cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"JX27cm","offer_id":46568724988100,"sku":"14:200001951#JX27cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"CX35cm","offer_id":46568725020868,"sku":"14:200002130#CX35cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"CX27cm","offer_id":46568725053636,"sku":"14:200003699#CX27cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"BX27cm","offer_id":46568725086404,"sku":"14:200004891#BX27cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"GX27cm","offer_id":46568725119172,"sku":"14:350850#GX27cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"FX27cm","offer_id":46568725151940,"sku":"14:365458#FX27cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"DX27cm","offer_id":46568725184708,"sku":"14:100018786#DX27cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"JX35cm","offer_id":46568725217476,"sku":"14:200001438#JX35cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"BX35cm","offer_id":46568725250244,"sku":"14:200004890#BX35cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"AX35cm","offer_id":46568725283012,"sku":"14:200004889#AX35cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"AX27cm","offer_id":46568725315780,"sku":"14:193#AX27cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"B1X35cm","offer_id":46568725348548,"sku":"14:366#B1X35cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"B1X27cm","offer_id":46568725381316,"sku":"14:496#B1X27cm","price":32.9,"currency_code":"USD","in_stock":true},{"title":"A1X35cm","offer_id":46568725414084,"sku":"14:1254#A1X35cm","price":32.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3600\/7364\/files\/S842da8c9af4e4433bb7d188e80a66a79p.webp?v=1787607289"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3600\/7364\/collections\/zontes_368E_Accessories.jpg?v=1787780483","url":"https:\/\/zontesaccessories.com\/collections\/368e-accessories.oembed","provider":"Zontes Accessories","version":"1.0","type":"link"}